Modul:Convert/text

Fra Wikipedia, den frie encyklopedi
Hopp til navigering Hopp til søk


-- Text used by Module:Convert, for no.wikipedia.org (Norwegian).
-- This is a separate module to simplify translation for use on another wiki.

local translation_table = {
	numdot = ',',        -- decimal mark
	numsep = ' ',   -- separator for number grouping
	per_word = 'per',    -- for units like "miles per gallon"
	plural_suffix = '',  -- disable plural unit names
	specials = {         -- for special processing by makeunits
		-- PLEASE DO NOT CHANGE THE FOLLOWING
		-- until all the units have been fixed
		-- (the text used here must be the same as that used in the unit definitions).
		utype = {
			-- ["unit type in local language"] = "name_used_in_this_script"
			["fuel efficiency"] = "type_fuel_efficiency",
			["length"] = "type_length",
			["temperature"] = "type_temperature",
			["volume"] = "type_volume",
		},
		ucode = {
			exception = {
				-- ["unit code in local language"] = "name_used_in_module_convert"
				["ft"] = "integer_more_precision",
				["in"] = "subunit_more_precision",
				["lb"] = "integer_more_precision",
			},
			istemperature = {
				-- Common temperature scales (not keVT or MK).
				-- ["unit code in local language"] = 1
				["C"] = true,
				["F"] = true,
				["K"] = true,
				["R"] = true,
			},
			usesymbol = {
				-- Use unit symbol not name if abbr not specified.
				-- ["unit code in local language"] = 1
				["C"] = 1,
				["F"] = 1,
				["K"] = 1,
				["R"] = 1,
				["C-change"] = 1,
				["F-change"] = 1,
				["K-change"] = 1,
			},
			alttype = {
				-- Unit has an alternate type that is a valid conversion.
				-- ["unit code in local language"] = "alternate type in local language"
				["Nm"] = "energy",
				["ftlb"] = "torque",
				["ftlb-f"] = "torque",
				["ftlbf"] = "torque",
				["inlb"] = "torque",
				["inlb-f"] = "torque",
				["inlbf"] = "torque",
				["inoz-f"] = "torque",
				["inozf"] = "torque",
			},
		},
	},
	mtext = {
		-- Text used by Module:Convert/makeunits.
		titles = {
			-- name_used_in_this_script = "Title of page"
			conversion_data = 'Modul:Convert/documentation/conversion data/dok',
		},
	},
}

-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
	-- The prefix field is what the prefix should be, if different from the prefix used.
	['Y'] = { exponent = 24, name = 'yotta',                  },
	['Z'] = { exponent = 21, name = 'zetta',                  },
	['E'] = { exponent = 18, name = 'exa'  ,                  },
	['P'] = { exponent = 15, name = 'peta' ,                  },
	['T'] = { exponent = 12, name = 'tera' ,                  },
	['G'] = { exponent =  9, name = 'giga' ,                  },
	['M'] = { exponent =  6, name = 'mega' ,                  },
	['k'] = { exponent =  3, name = 'kilo' ,                  },
	['h'] = { exponent =  2, name = 'hekto',                  },
	['da']= { exponent =  1, name = 'deka' ,                  },
	['d'] = { exponent = -1, name = 'desi' ,                  },
	['c'] = { exponent = -2, name = 'centi',                  },
	['m'] = { exponent = -3, name = 'milli',                  },
	['μ'] = { exponent = -6, name = 'mikro', prefix = 'µ'     },  -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
	['µ'] = { exponent = -6, name = 'mikro',                  },  -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
	['u'] = { exponent = -6, name = 'mikro', prefix = 'µ'     },  -- not an SI prefix, but allow for people typing this
	['n'] = { exponent = -9, name = 'nano' ,                  },
	['p'] = { exponent =-12, name = 'piko' ,                  },
	['f'] = { exponent =-15, name = 'femto',                  },
	['a'] = { exponent =-18, name = 'atto' ,                  },
	['z'] = { exponent =-21, name = 'zepto',                  },
	['y'] = { exponent =-24, name = 'yokto',                  },
}

-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
	{ "US", link = "United States customary units" },
	{ "U.S.", link = "United States customary units" },
	{ "imperial", link = "Imperial unit" },
	{ "imp", link = "Imperial unit" },
}

-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
	["3"]  = { "tusen", exponent = 3 },
	["6"]  = { "million", exponent = 6 },
	["9"]  = { "milliard", link = "Milliard", exponent = 9 },
	["12"] = { "billion", link = "Billion", exponent = 12 },
	["15"] = { "billiard", link = "Billiard", exponent = 15 },
}

-- One of the following categories is included in the text of each message.
-- Trying just one category as probably all that is needed.
local all_categories = {
	unit = "[[Kategori:Sider med konverteringsmaler som inneholder feil]]",
	option = "[[Kategori:Sider med konverteringsmaler som inneholder feil]]",
	warning = "[[Kategori:Sider med konverteringsmaler som inneholder feil]]",
	tracking = "[[Kategori:Sider med konverteringsmaler som inneholder feil]]",
}

-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' }  -- no longer need the more elaborate substitute used before 2013-09-28

-- All messages that may be displayed if a problem occurs.
local all_messages = {
	-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
	-- Each displayed message starts with "Convert:" so can easily locate by searching article.
	cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Hjelp:Konverteringsmeldinger#$4|<span title="Convert: $1">konverter: $2</span>]]</i>]</sup>$3<span class="error"></span>',
	cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Hjelp:Konverteringsmeldinger#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>',
	cvt_format_preview = '<strong class="error">Feil ved konvertering: $1 [[Hjelp:Konverteringsmeldinger#$4|(hjelp)]]</strong>$3',
	-- Each of following messages is a table:
	-- { [1] = 'title',         -- mouseover title text
	--   [2] = 'text',          -- link text displayed in article
	--   [3] = 'category key',  -- key to lookup category in all_categories
	--   [4] = 'anchor',        -- anchor for link to relevant section on help page
	--   regex = gsub_regex,
	--   replace = gsub_table,
	-- }                    Mouseover title text                           Link text               CatKey     Anchor
	cvt_bad_input      = { 'inndata "$1" må være et tall og en enhet'       , 'ugyldig inndata'    		, 'option',  'ugyldig_inndata'      },
	cvt_bad_num        = { 'Verdien "$1" må være et tall'               	, 'ugyldig tall'	    	, 'option',  'ugyldig_tall'  	    },
	cvt_big_prec       = { 'Presisjonen "$1" er for høy'                	, 'for høy presisjon' 		, 'option',  'for_høy_presisjon' 	},
	cvt_invalid_num    = { 'Tallet er for høyt'                      		, 'for høyt tall'     		, 'option',  'for høyt tall'      	},
	cvt_no_num         = { 'Trenger verdien som skal konverteres'          	, 'trenger en verdi'    	, 'option',  'trenger_en_verdi'     },
	cvt_no_num2        = { 'Trenger en tilleggsverdi for et område'         , 'trenger tilleggsverdi'	, 'option',  'trenger_tilleggsverdi'},
	cvt_bad_frac       = { 'brøken "$1" må være et heltall over 1'      	, 'ugyldig brøk'    		, 'option',  'ugyldig_brøk'     	},
	cvt_bad_prec       = { 'Presisjonen "$1" må være et heltall'       		, 'ugyldig presisjon'   	, 'option',  'ugyldig_presisjon'    },
	cvt_bad_sigfig     = { 'sigfig "$1" må være et positivt heltall'    	, 'ugyldig sigfig'      	, 'option',  'ugyldig_sigfig'       },
	cvt_empty_option   = { 'Tomt parameter "$1" ignorert'	            	, 'tomt parameter'     		, 'option',  'tomt_parameter'       },
	cvt_deprecated     = { 'Parameter "$1" er utdatert'                		, '*'                   	, 'option',  'utdatert_parameter', format = 'cvt_format2', nowarn = true },
	cvt_no_spell       = { 'Stavemåten er ikke tilgjengelig'            	, 'bug, spør om hjelp'  	, 'option',  'spør_om_hjelp'        },
	cvt_unknown_option = { 'Ugyldig parameter "$1" ignorert'            	, 'ugyldig parameter'   	, 'option',  'ugyldig_parameter'    },
	cvt_wd_fail        = { 'Klarer ikke å hente data fra Wikidata'         	, 'wikidata problem'    	, 'option',  'wikidata_problem'     },
	cvt_bad_default    = { 'Enheten "$1" har en ugyldig standard'       	, 'bug, spør om hjelp'  	, 'option',  'spør_om_hjelp'        },
	cvt_bad_unit       = { 'Enheten "$1" er ugyldig her'                	, 'enhet ugyldig her' 		, 'option',  'enhet_ugyldig_her'  	},
	cvt_no_default     = { 'Enheten "$1" har ingen standard utputenhet' 	, 'bug, spør om hjelp'  	, 'option',  'spør_om_hjelp'        },
	cvt_no_unit        = { 'Trenger navn på enhet'                      	, 'trenger enhetsnavn'  	, 'option',  'trenger_enhetsnavn'   },
	cvt_unknown        = { 'Enhetsnavnet "$1" er ukjent'                	, 'ukjent enhet'        	, 'option',  'ukjent_enhet'         },
	cvt_should_be      = { '$1'                                         	, 'tvetydig enhet'      	, 'option',  'tvetydig_enhet', regex = unitcode_regex, replace = unitcode_replace },
	cvt_mismatch       = { 'Kan ikke konvertere "$1" til "$2"'          	, 'enhetskrasj'       		, 'option',  'enhetskrasj'        	},
	cvt_bug_convert    = { 'Bug: Kan ikke konvertere mellom angitte enheter', 'bug, spør om hjelp'  	, 'option',  'spør_om_hjelp'        },
	cvt_lookup         = { 'Enheten "$1" er feil definert' 		          	, 'bug, spør om hjelp'  	, 'option',  'spør_om_hjelp'        },
}

-- Text to join input value/unit with output value/unit.
local disp_joins = {
	["or"]         = { " eller " , ""  },
	["sqbr-sp"]    = { " ["      , "]" },
	["sqbr-nbsp"]  = { "&nbsp;[" , "]" },
	["comma"]      = { ", "      , ""  },
	["slash-sp"]   = { " / "     , ""  },
	["slash-nbsp"] = { "&nbsp;/ ", ""  },
	["slash-nosp"] = { "/"       , ""  },
	["b"]          = { " ("      , ")" },
	["br"]         = { "<br/>"   , ""  },
}

-- Text to separate values in a range.
local range_types = {
	-- Specifying a table requires "off" and "on" values (for "abbr=off" and "abbr=on");
	-- other fields are optional.
	-- Normally, "adj=on" uses hyphens with unabbreviated units (names, not symbols).
	-- However, "exception = true" means hyphens are also used with "adj=on|abbr=on".
	-- If "adj" is defined here, that text is used with "adj=on" (without hyphens).
	["+"]      = " + ",
	[","]      = ",&nbsp;",
	[", and"]  = ", og ",
	[", or"]   = ", eller ",
	["by"]     = " ganger ",
	["-"]      = "–",
	["to about"] = " to about ",
	["and"]    = { off = " og ", on = " og ", exception = true },
	["or"]     = { off = " eller " , on = " eller " , exception = true },
	["to"]     = { off = " til " , on = " til " , exception = true },
	["to(-)"]  = { off = "&nbsp;til ", on = "–" },
	["+/-"]    = { off = "&nbsp;±&nbsp;", on = "&nbsp;±&nbsp;", adj = "&nbsp;±&nbsp;", is_range_change = true },
	["x"]      = { off = " ganger ", on = " ×&nbsp;", is_range_x = true },
	["xx"]     = "&nbsp;×&nbsp;",
	["*"]      = "×",  -- use "*" to replace "x" in {{convert/2}} which is different from "x" in old {{convert}}
}

local range_aliases = {
	-- ["alternative name for a range"] = "standard range name"
	["and(-)"]   = "and",
	["&"]        = "and",
	["–"]        = "-",
	["&ndash;"]  = "-",
	["to-"]      = "to(-)",
	["×"]        = "x",
	["&times;"]  = "x",
	["±"]        = "+/-",
	["&plusmn;"] = "+/-",
	["eller"]    = "or",
	["ganger"]   = "by",
	["og"]       = "and",
	["til"]      = "to",
	["til(-)"]   = "to(-)",
}

-- The following "words" are accepted to make a simple range, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, '-' after '+/-' and 'x' after 'xx'.
-- Put '-' last so can have a simple range with negative values as in {{convert|-5 to -1|C}}.
local range_words = { '+/-', 'to(-)', 'xx', 'x', '*', 'to', 'or', 'by', '–' , '-' }

local ranges = {
	types = range_types,
	aliases = range_aliases,
	words = range_words,
}

-- Valid option names.
local en_option_name = {
	-- ["local text for option name"] = "en name used in this module"
	["abbr"] = "abbr",
	["adj"] = "adj",
	["comma"] = "comma",
	["debug"] = "debug",
	["disp"] = "disp",
	["frac"] = "frac",
	["lang"] = "lang",
	["lk"] = "lk",
	["near"] = "near",
	["order"] = "order",
	["round"] = "round",
	["sigfig"] = "sigfig",
	["sing"] = "adj",                   -- "sing" is an old alias for "adj"
	["sortable"] = "sortable",
	["sp"] = "sp",
	["spell"] = "spell",
}

-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At en.wiki, "abbr" includes:
--     ["comma"] = "opt_nocomma"
-- As a result, if the template uses abbr=comma, this script sets:
--     parms["opt_nocomma"] = true
--     parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
local en_option_value = {
	["abbr"] = {
		-- ["local text for option value"] = "en value used in this module"
		["comma"] = "opt_nocomma",      -- no numsep in input or output numbers
		["def"] = "",                   -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
		["h"] = "on",                   -- abbr=on + use "h" for hand unit (default)
		["hh"] = "opt_hand_hh",         -- abbr=on + use "hh" for hand unit
		["in"] = "in",                  -- use symbol for LHS unit
		["mos"] = "mos",                -- in a range, repeat the input unit (no longer used)
		["none"] = "off",               -- old name for "off"
		["off"] = "off",                -- use name for all units
		["on"] = "on",                  -- use symbol for all units
		["out"] = "out",                -- use symbol for RHS unit (default)
		["values"] = "opt_values",      -- show only input and output numbers, not units
		["~"] = "opt_also_symbol",      -- show input unit symbol as well as name
	},
	["adj"] = {
		["1"] = "opt_singular",         -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1)
		["flip"] = "opt_flip",          -- reverse order of input/output
		["j"] = "opt_use_nbsp",         -- "join": use "&nbsp;" instead of " " between value and unit name
		["mid"] = "opt_add_s, opt_adj_mid",  -- adj=on with user-specified text after input unit (between input and output)
		["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers
		["off"] = "",                   -- ignored (off is the default)
		["on"] = "",                    -- disable hyphenation
		["on"] = "opt_add_s",           -- append "s" to unit name, singular or plural, if name does not end with "s" (no hyphenation)
		["pre"] = "opt_one_preunit",    -- user-specified text before input unit
		["ri0"] = "ri0",                -- round input with precision = 0
		["ri1"] = "ri1",                -- round input with precision = 1
		["ri2"] = "ri2",                -- round input with precision = 2
		["ri3"] = "ri3",                -- round input with precision = 3
	},
	["comma"] = {
		["5"] = "opt_comma5",           -- only use numsep grouping if 5 or more digits
		["gaps"] = "opt_gaps",          -- use gaps, not numsep, to separate groups of digits
		["gaps5"] = "opt_gaps, opt_comma5",  -- opt_gaps + opt_comma5
	},
	["debug"] = {
		["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
	},
	["disp"] = {
		["/"] = "slash",                -- join: '/'
		["2"] = "opt_output_only",      -- display only output value and symbol/name (not input)
		["5"] = "opt_round5",           -- round output value to nearest 5
		["b"] = "b",                    -- join: '(...)'
		["br"] = "br",                  -- join: '<br/>'
		["comma"] = "comma",            -- join: ','
		["flip"] = "opt_flip",          -- reverse order of input/output
		["flip5"] = "opt_flip, opt_round5",  -- disp=flip + disp=5
		["nocomma"] = "opt_nocomma",    -- no numsep in input or output numbers
		["number"] = "opt_output_number_only",  -- display output value (not input, and not output symbol/name)
		["or"] = "or",                  -- join: 'or'
		["eller"] = "or",
		["out"] = "opt_output_only",
		["output number only"] = "opt_output_number_only",
		["output only"] = "opt_output_only",
		["preunit"] = "opt_two_preunits",    -- user-specified text before input and output units
		["s"] = "slash",                -- join: '/'
		["slash"] = "slash",            -- join: '/'
		["sqbr"] = "sqbr",              -- join: '[...]'
		["table"] = "opt_table",        -- output is suitable for a table cell with align="right"
		["tablecen"] = "opt_tablecen",  -- output is suitable for a table cell with align="center"
		["u2"] = "opt_output_unit_only",  -- display output symbol/name (not input, and not output value)
		["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
		["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
		["unit2"] = "opt_output_unit_only",
		["x"] = "x",                    -- join: <first>...<second> (user-specified text)
	},
	-- frac=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
	["lang"] = {
		["en"] = "opt_lang_en",         -- use en digits for output, regardless of local language
	},
	["lk"] = {
		["in"] = "in",                  -- link LHS unit name or symbol
		["off"] = "off",                -- do not link: same as default except for hand unit
		["on"] = "on",                  -- link all unit names or symbols (but not twice for the same unit)
		["out"] = "out",                -- link RHS unit name or symbol
	},
	["near"] = {
		["5"] = "opt_round5",           -- round output value to nearest 5
	},
	["order"] = {
		["flip"] = "opt_flip",          -- reverse order of input/output
	},
	["round"] = {
		["5"] = "opt_round5",           -- round output value to nearest 5
		["25"] = "opt_round25",         -- round output value to nearest 25
		["each"] = "opt_round_each",    -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
	},
	-- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more
	["sortable"] = {
		["off"] = "",                   -- ignored (off is the default)
		["in"] = "opt_sortable_in",     -- output numeric hidden sort field for use in a sortable table, based on input
		["on"] = "opt_sortable_in",     -- same
		["out"] = "opt_sortable_out",   -- same, based on output
	},
	["sp"] = {
		["us"] = "opt_sp_us",           -- use U.S. spelling (like "meter" instead of default "metre")
	},
	["spell"] = {                       -- only English spelling is supported; not scientific notation; only some fractions
		["in"] = "opt_spell_in",        -- spell input value in words
		["In"] = "opt_spell_in, opt_spell_upper",                -- spell input value in words with first letter uppercase
		["on"] = "opt_spell_in, opt_spell_out",                  -- spell input and output values in words
		["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
	},
}

return {
	SIprefixes = SIprefixes,
	all_categories = all_categories,
	all_messages = all_messages,
	currency = { ['$'] = true, ['£'] = true },
	customary_units = customary_units,
	disp_joins = disp_joins,
	en_option_name = en_option_name,
	en_option_value = en_option_value,
	eng_scales = eng_scales,
	ranges = ranges,
	translation_table = translation_table,
}